Copyright notice
The material available on this page is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author’s copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
For material with IEEE copyright
Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from IEEE.
- M. Kezunovic, et al., “IEEE Standard for Synchrophasor Measurements for Power Systems – Amendment 1: Modification of Selected Performance Requirements,” IEEE C37.118.1a-2014.
- M. Kezunovic, et. al, “IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control,” IEEE C37.242-2013.
- M. Kezunovic, et. al., “IEEE Guide for Phasor Data Concentrator Requirements for Power System Protection, Control and Monitoring,” IEEE C37.244-2013.
- M. Kezunovic, et. al.,” IEEE Standard for Synchrophasor Data Transfer for Power Systems,” IEEE C37.118.2-2011.
- M. Kezunovic, et. al., “IEEE Standard for Synchrophasor Measurements for Power Systems,” IEEE C37.118.1-2011.
- M. Kezunovic, et al., “IEEE Standard for Common Format for Event Data Exchange (COMFEDE) for Power Systems,” IEEE C37.239-2010
- M. Kezunovic, et.al, “IEEE Guide for Power System Protection Testing,” IEEE Std. C37.233-2009.
- M. Kezunovic, et al, “IEEE Recommended Practice for Naming Time Sequence Data Files,” IEEE Std C37.232-2007.
- M. Kezunovic, et al, “IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines,” IEEE Std C37.144-2004.
- M. Kezunovic, et al., “IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems,” IEEE C37.111-1999.
- M. Kezunovic, et al., “IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems,” IEEE C37.111-1991.